Please use the search box, choose from the. First, you will need to turn the gas valve on the front of the unit to the off position.
Remove all gas pipe back to area desired.
How to turn off gas fireplace valve uk. If you’re working with a fireplace key, place the key into the slot. Yes you'd lose the use of the boiler and stove for a while, but not a serious hardship. Use the yellow teflon tape, because it is approved and has consistent thickness, or use teflon pipe dope.
The resistance should measure between 0 and 0.2ω for sit’s sit 820 series nova millivolt fireplace valve. We've recently made some changes to our website, so the page may have moved or no longer exist. All you have to do is open the control panel covering and switch or turn the control knob to the “off” position.
To close the valve, use an adjustable wrench adjusted. If the flames were out of control, i would turn off the gas to the house, wait for the fire to cool down and then use the isolation valve located inside the fireplace before turning the gas back on at the mains. Gas fireplaces are required to have two shut off valves:
If the pilot light isn't firing, your gas fire won't switch on. To test the magnet's resistance, place one lead on the soldered connection and the other to the ground. If you have an emergency, you need to evacuate your family and turn off the gas at the meter.
Here is the step by step method to remove the thermocouple. But before that a tightness test should be performed because those washers sometimes pass. The requirements for a gas fireplace shutoff valve are at 409.5 in the international fuel gas code (ifgc).
To ensure it’s completely turned off, the gas shutoff valve should be closed. Use a black gas pipe cap. Very slowly, turn the meter back into the on position.
A plug can crack if tightened to tight. Once you have done this, allow some time for the unit to cool down. The tools, which include the correct wrenches, hose replacement, valve, and valve stem replacement kit, as well as pipe and screw seal, must be obtained first, and then you must turn the gas off at the street (there’s no sense taking any.
Shut off the gas at the meter, 2. The pilot light on your gas fireplace needs to ignite for your appliance to turn on. This one is ventless but the process should be similar if it’s vented.
This allows you to easily shut off the gas without moving the stove. For added safety, it is always recommended to then turn the main gas shutoff valve for the system to the off position, as well. It could be anywhere in the main gas line.
Do not use a plug in a fitting. For most fireplaces, all you will need to do is open the front of the unit to access the pilot, then turn the pilot light valve to the off position. Be prepared to move back quickly in case the fire ignites stray gas particles and flares out into the immediate surrounding area
Most stoves are installed so that the gas shutoff valve is accessible through the drawer compartment; When the tab is parallel to the gas pipe, the valve is open and the gas is on. You are going to need a wrench or gas shut off tool to do this.
Make sure that the emergency gas valve is turned to the closed position as well. 1) be located in the same room as the fireplace. While replacing a gas fireplace valve can be hard, you can replace the gas fireplace valve, if you feel you have the expertise and correct tools.
Stdclass object ( [_index] => fireplace_keywords [_type] => keywords [_id] => c5a323aea61dfa0da938dd596ea8bf38 [_version] => 2 [_seq_no] => 8184 [_primary_term] => 1. Sorry, we couldn't find the page. Open the vent, and you will be able to see if the flame is out.
Just to set the record straight, that valve is a service shut off, not an emergency shut off. How to turn on your gas fireplace in a condo or single family home. What you do is unscrew the outer nut off, then unscrew the inner part until near the top, put the outer nut back on and the washer should seal it.
If the valve is perpendicular to the main gas line it should be shut, and if it’s in line with the pipe then it should be open. This is what you turn to shut off the gas. 2) within 6 feet of the appliance.
You will need to remove the decorative logs and place them on. Next, put a tarp down, in front of the fireplace. You’ll then turn the valve until it’s closed, and the gas supply will be cut off.
Turning off this type of gas fireplace is even easier. The safety magnet is located on the back side of the valve and the valve may need to be removed to test its resistance. Shine a flashlight into the open drawer space to check for the gas shutoff valve.
If you have tried to light the fireplace but nothing is happening, first check that the gas valve is in the on position and emitting gas. This will release gas into the fireplace, causing the pilot light to ignite.