It finally came today and except for a real quick here's how it works, all i got was a bunch of papers and a box of chemicals. When you add chlorine to the water in your hot tub you should test the water and wait until the levels of chlorine have dropped to a safe recommended level of between 2 and 4 parts per million.
You should leave the hot tub uncovered for at least 15 minutes immediately after shocking.
How to shock a hot tub with chlorine granules. Again, you can use our chlorine shock dose calculator to help you figure out how that translates into the amount of chlorine granules required for your hot tub size. Bromine is the preferred hot tub sanitizer but is more expensive than other options. Also, ensure you keep your hot tub pump on to distribute the chlorine optimally.
Between 7.2 and 7.6 if you use a chlorine sanitiser and between 7.0. Ensure your ph is correct. The shocking process is relatively easy and can easily be done yourself without the help of a professional.
When using a biguanide sanitizer system (aqua silk), the spa shock is made of liquid hydrogen peroxide, which can not be used in a bromine or chlorine treated spa/hot tub. The hot tub chlorine shock will break up the used up chlorine to release more free chlorine into the water. It’s recommended that you keep the chlorine levels within a hot tub between 2 and 4 ppm in order to keep it sanitised.
Use chlorine granules (multitabs cannot be used to shock, as these dissolve too slowly). Refill the hot tub with fresh water and then carefully add in the necessary chemicals, making sure to not overdo it. Helping to clear your water and restore sanitiser.
Relax granular shock chlorine is highly effective at destroying contaminants in water (such as bacteria and body oil) from your spa water. By shocking the water, you remove organic compounds from the water, kill bacteria, remove bromamines or chloramines and reactivate the bromides in the spa for cleaner water. This would allow the shock to fully oxidize the water.
If your using chlorine shock granules then these must be dissolved first, following the instructions on the packaging carefully mix the chemicals with water. Adjust the ph levels of your spa’s water to between 7.4 and 7.6. This extra large dose helps to break down the combined chlorine (‘used up’ chlorine) and other contaminants in the water.
You can easily shock dose your hot tub once you know the hot tubs litrage. Remember never add water to the chemicals always add the chemicals to the water. Here is an easy step by step:
This should be done at least weekly, or more often depending on how much your tub is used. It's important to maintain the correct amount of chlorine in your hot tub, just as it is in a pool. If you don’t quite know how much to add, there are a number of resources that can direct you.
Most spa chemical test strips will measure total chlorine. A sign that you need to shock your hot tub is when the total chlorine is higher than the free chlorine. Add the recommended amount of chlorine to water (never add water to chemicals), using a mixing jug.
Shocking your spa water allows you to raise chlorine levels above the recommended amount for a brief period of time. Depending upon how much chlorine there is in the water this may take a couple of hours or up to 24 hours or so for the levels to reduce. Such an amount of chlorine will raise the chlorine level to 10 ppm.
Once you have established you have added too much chlorine, you will need to. Ensure the cover is removed whilst shock dosing, the swimming pool or hot tub will need to be uncovered throughout the shock dosing process. Unlock the floating dispenser’s top by slightly twisting it and place the chlorine or bromine tablets at the base.
Then, place the dispenser in the tub. To cut costs, hot tub owners often use chlorine instead. If the chlorine level is too low, the spa won't be sanitary.
It is also good to shock treat your hot tub every 2 weeks or more often if heavily used. Simply cut open a sachet and empty into your hot tub. Check out aquasparkle spa fusion sachets and relax energize sachets.
Replace the lid and twist it to lock it tightly. The most convenient and easy way to add non chlorine shock to your hot tub. By emptying out the hot tub, you simply remove all of the chlorine with the water.
Remove the hot tub cover so oxygen can get to the water. This will help to rectify the sanitizer level, prevent the growth of microorganisms and help maintain sparkling, crystal clear water. My question is, since i only have a 100 gallon spa, and the chlorine granules say to add 1/2 oz per 500.
I bought a one person sundance solo spa for myself, and the electrician is coming tomorrow to finish the wiring. How to shock your inflatable hot tub. To shock your hot tub, simply follow these easy instructions.
All you have to do is add the shock and let it work its magic. After treatment, water quality and clarity is often completely restored. It is good practice to shock dose hot tub water with clearwater chlorine granules after a period of high usage.
How to shock your hot tub. You should add 0.7 oz of chlorine granules to your 300 gallons hot tub to shock your hot tub before using it. The shock will also add to the level of chlorine in the water and kill the contaminants in it.
Shock overnight, as you need to wait 24 hours before using. To shock your hot tub, the easiest thing to do is usually to just add a shock dose of the same chlorine granules you use to sanitize your spa (the spaguard ones i linked above are a sanitizer and an oxidizer in one). Test the water again using your strips before you get in.
Shock your hot tub water.