Save on pool filters, pumps, heaters, and more. Then pour the sand back in.
Fill the hose completely with water.
How to open above ground pool with hayward sand filter. Remove any standing water from the pool cover; For a cartridge filter, simply depress the latches on the top of the filter tank. Impurities are extracted from the water using sand to collect and attract the debris as small as 20 to 40 microns.
The most common problem is a cracked lateral, which is one of the perforated pipes at the bottom of the filter that catches water that has circulated through the sand. To do this simply unscrew and remove the drain cap on the bottom of the filter barrel. Position the filter so that the piping connections, control valve and winter drain
Hayward pro series sand filter operation and maintenance. All hayward filters are equipped with a locking ring. The slide valve is attached to the side of the filter and has two modes of operation:
If you see it blowing out into the pool , something is broken. Once you have the new ones in take a bucket or hose and fill the bottom of the filter with water so the water covers the laterals. In short, you have to get all of the water out of everywhere within the filter including the filter head.
Reinstall or assemble any equipment. Sand filters the oldest and most popular method of filtration is sand. Just set the mulitport valve to filter and turn on the pump.
For de and sand filters, use a wrench to loosen and remove the bolts securing the lid in place. Remove the pump housing cover to fill the pump chamber and intake line with water. See hayward pool products, tool, and resources;
Sand coming from the pool filter is the sign of a broken component in the filter. This guide shows you how to operate a hayward. The filter system should be installed, not more than 6 feet above pool water level, on a level concrete slab, very firm ground, or equivalent, as recommended by your pool dealer.
They are plastic and will crack if you overtighten. For the selected few who have chosen to open their pool on their own, make sure to follow these steps in order to maintain a simple pool opening process. Connect the open end of the water filled hose to the return jet in the pool.
You do not need to remove any sand from the filter. Make sure the water is at the proper level. Determine the type of hayward filter you are working with.
If you’re using a skimmer vacuum plate, attach it to the end of the water filled hose. Use a screwdriver to unscrew the locking ring. None of these steps takes any particular skill or very much time but you need to make sure that you do them all.
Put the cap away in a safe place until the next time you open the pool. You then need to leave the filter head in a position which will leave all ports open. Cover the end of the water filled hose and put the plate in your skimmer, ensuring a good seal to maintain suction.
Ad explore great deals on a wide range of pool pumps at doheny's. Using a shop vac, blow all the water out of the plumbing lines running between the filter equipment and the pool. Blow water out of each line from the filter to the return outlets and from the pump to the skimmers.
Save on pool filters, pumps, heaters, and more. Take out the winterizing plugs in fittings, such as skimmers, and return fittings; Ad explore great deals on a wide range of pool pumps at doheny's.