Release the loading latch at the end the stapler and pull the slide open. Point the tip of the gun away from you and anyone else in the area.
Open it up as you would a standard stapler, pulling the base away from the top handle.
How to load a bostitch staple gun bt110. The bostitch nail gun, manufactured by stanley, is known as one of the most durable and effective nail guns on the market. Heavy duty bostitch staple gun basics. Lift the cover to unhook it and tilt it open.
On most bostitch models, a visual aid will be printed on or near the tray to help with loading. Staple guns are larger and look different, and you put heavier staples in them and staple things to wooden surfaces with those. Turn the stapler upside down so the handle trigger faces downward.
Never place your hand under the stapler. Slide the latch back, and close the stapler. Load the nails with the points facing down toward the bottom of the magazine.
Stanley bostitch pneumatic stapler operation and maintenance manual. (electric staplers are really neat, my old teacher. Locate the follow block release clip at the rear base of the bostitch staple gun.
Thankfully, there's now the powered nail gun. Push the slide in until the loading latch clicks and catches. How to load staples into the stanley sharpshooter stapler.
Flip the stapler upside down and open the base away from the body. $49.99, or best offer.bostitch hammer stapler gun & t5 tacker staples in box. Squeeze the latch located near the bottom of the magazine and slide off the cover.
Slide the magazine out by pulling back the black tab shown below. Here are the steps to follow: How do you load a bostitch heavy duty stapler?
Place a sleeve of heavy duty staples into the carrying tray, prongs facing downward. Pull the magazine pusher back to expose the staple channel. Like upholstery or signs on a telephone pole.
How to load a craftsman nailer & stapler gun. Press the metal latches on the rear edge of the stapler to release the cover. Also know, how do you load a craftsman staple gun?
Driving nails into a surface used to be a daunting task, particularly if lots of nails were to be used in a short time. The magazine cover is located right next to the aperture through which the staples exit when you shoot them. Staple guns come in manual, electric, and pneumatic models to fit a variety of needs, and they’re more powerful than the average desk stapler.
Bar will not go back in when loaded with staples. Drop the staples into the magazine channel with the points facing up. How to load bt110 staple gun.
Lay a stick of staples in the loading channel with the legs of the staples facing up. Insert a new strip of staples into the compartment with the pointed ends facing upward. Step 1, set your bostitch stapler on a hard, flat surface.step 2, look for the back assembly, sometimes called a pusher.
It looks like my old one, but i cannot load staples the same way. The follow block is a rod mechanism that pushes staples toward the front of the magazine. Bostitch staplers, such as the bostitch t5, load from the front of the magazine.
Before you can use your staple gun for a woodworking, upholstery, or craft project, you’ll need to load the staples into the gun. The heavy duty staple gun is covered by our limited lifetime warranty. You were using a stapler.
For desktop staplers, the staples should face downwards. Ensure the handle safety is on and the handle is locked down. Tap or hover over image to zoom in.
Replace the follow block in its cradle and depress the top of it until the spring begins to. How do i put staples in this thing i just bought? To load a bostitch stapler, pull the top section of the stapler away from the bottom section, squeeze the latch and pull it towards you.