How To Disconnect Copper Water Line From Fridge
Remove the copper tubing from the back of the refrigerator by. Locate the copper tube at the back of the refrigerator.
Since most refrigerators now have an automatic ice maker or a water dispenser, it is important to know where to locate the refrigerator water valve in order to properly shut it off during needed repairs.
How to disconnect copper water line from fridge. The unscrew the adaptor fitting out of the fridge. How to disconnect the ice maker line from the back of fridge? Try moving the fridge out and see if there's enough play in the line (it'll be close).
The mild convenience isn't worth the potentially massive headache. Please excuse my beginner level question but i am trying to save myself $125 to have a sears technician come and disconnect my refrigerator's water line for me. You must remove the freezer pipe to cap off the water supply line to your fridge.
I found the shutoff valve under the sink, as done by the previous homeowner, but i can't determine whether it's a ball valve or not. Supply line working from copper main and supply line up fridge flowing. Slide the nut down the line so that it is out of the way.
If you suspect your refrigerator is the source of the problem, we. Disconnect the sink and attach the tee fitting to your shut off valve. Place a bucket below the copper tubing shutoff valve to catch the surplus water which may be within the pipe.
A refrigerator water valve is an important component of most refrigerators that have an icemaker, water dispenser, or both. If your shutoff valve is leaking, unscrew the shutoff valve and pull it off the main water supply pipe. I just turned the shutoff valve off behind the fridge and disconnected the hose.
Reconnect the sink line and then connect your refrigerator water line. Step 3 use pliers to grab the metal nut on the end of the copper. There is a compression nut covering the line at the point it goes into the bottom of the refrigerator.
If not, head to your basement or wherever your main water valve is located, and turn that to the closed position. The second step is to use the screwdriver to remove the water line from the rest of the fridge. Bottom of icemaker hot and icemaker does not fill with water.
I think this is what holds the line in place but it will not turn and i'm afraid of breaking something. Place a bucket under the copper tubing shutoff valve to catch the excess water that may be in the pipe. If this is the case, when you go to remove the line from the fridge, loosen the compression nut until the tube can be removed from the adaptor fitting.
Make sure you leave extra tubing coiled behind the refrigerator, so you can move the refrigerator when necessary. Turn off the ice maker from your fridge. Here are a few tips to help with how to properly disconnect a water line for an icemaker:
I need to know how to disconnect the copper water line that goes into my refrigerator's ice maker. The copper probably has a standard compression ferrule and nut, to attach it to either the inlet valve or to a short copper stub. Some models have the metal lever inside the door that you flip up to turn off.
Drain the contents of the water line over a. On the newer models, the outside of the fridge may have a “lock” feature for ice and water. I had to disconnect mine because the seal broke and i ended up with water going through my floor into my basement.
Move the nut in a counterclockwise motion to loosen it and remove it from the pipe. If there is a water valve behind your fridge, then you can easily turn the valve off to stop the water flow. How do you remove a copper water line from a refrigerator?
Tap into your sink line shut off valve with a tee fitting. The first step is to shut off the water supply to the fridge and unplug the refrigerator. Is there a way to remove icem.
I just bought a new refrigerator and have connected my previous copper water line to the appliance. Identify the copper pipe at the back of your fridge that feeds into the freezer. Attach one end of the copper tubing to the refrigerator’s water pipe, using a nut and ferrule.
Haven't had a problem since. I will never buy a fridge that dispenses water anymore. Leave a comment / miscellaneous.
In case your shutoff valve is leaking, unscrew the shutoff valve and pull it. Unscrew the compression nut holding the tube in the sleeve with a flat head screwdriver. Clamp onto the nut on the freezer pipe with a pair of small pliers.
Reconnect the tube to the adaptor fitting and screw a 3/8 threaded brass cap onto the end that was connected to the fridge. Keep in mind, the team at mr. Roll the fridge away from the wall.